We have 208 guests and 4 members online
RECORD YOUR VOICE
This is my Test Website www.igbo1.info
Look at the Hope Page to see:
1. My floating Module/Menu
2. The Recording Icon - This from the last Script of Pipespeaker.com
Pleas Click and see the Flow in Three Stages, My Floating as first with only Recording Sign r command. Then 2nd is The Stop and Reset Buttons with Sound Wave. The last (3rd leg) is the Stop and Reset button. Each has a visible
This is exactly how I like my Design to look like, if possible. Please, this is more important for small screens like Cell (Mobile) phones most people use these days.
Below are Scree shots to guide you:
Third (3rd) Leg _ "Play back button and Send Button. Mine should be Post (Send). This can be directed to my blog link or email or *Save" in users syastem. My preference will be to my own blog or forum
2nd (Second) Leg - With RECORDING Wave Front, STOP and RESET
1st (First) Leg - This is an example my Floating Module with smaller container size. Unlike the original on the website (www.igbo1.com) and Heyoya; there is nothing written on it. Therefore no clutter. Just the Record Button and icon. Note the X close button for extended Floater to retract into the corner where it is visible.
LASTLY IS THE SCHEMATIC AS ONE UNIT (ABOVE IS DESIGN FLOW)
Here you will see the schematic from 1 to 3. First is my website Floater with only Recording button in middle in floating Module extension. The X sends it back. Once Record is click, the 2nd dialog box with Actual Recording as shown by Sound Wave front. Here the Stop and Reset button as well as X close button are very visible. Then the 3rd is "Play back >" Sign. Here is the last option to Send or Post (Send) and Reset. Also the X cancel button.
PLEASE STUDY THIS VERY WELL BEFORE YOU START CUSTOMIZING.